Select Your Colour
Jotun Hardtop XP
Jotun Hardtop XP
Brand: Jotun
Request price and availability details
Select Your Options
View full details- DESCRIPTION
- Datasheet
DESCRIPTION
Description
This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very good gloss retention. It is a high solids product. The product has good application properties with low dry spray. To be used as topcoat in atmospheric environments.
Where To Use
Marine:
Recommended for topside, deck and superstructure.
Protective:
Recommended for offshore environments, refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. Used as a topcoat in pre-qualified NORSOK systems.
Approvals
This product contributes to the Green Buildings Standard credits. Please see section Green Building Standards. Pre-qualified in accordance with NORSOK M-501 in selected systems Grain, Newcastle Occupational Health
Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids.
When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8
Colors
According to color card and Multicolor Industry tinting system (MCI)
Application
| Spray | Use air spray or airless spray. |
| Brush | Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness. |
| Roller | May be used. Care must be taken to achieve the specified dry film thickness. |
Thinner
Jotun Thinner No. 10/ Jotun Thinner No. 26
Jotun Thinner No. 26 is supplied and used in USA due to legislation.
Jotun Thinner No 63 can be used for faster curing. Max addition; 5%. Please note that addition of Thinner No 63 will give reduced polife depending on ambient temperature.
