Select Your Colour
Jotun Hardtop AX
Jotun Hardtop AX
Brand: Jotun
Request price and availability details
Select Your Options
View full details- DESCRIPTION
- Datasheet
DESCRIPTION
Description
This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a high gloss finish with very good gloss retention. It has good chemical resistance. It is a high solids product. This product contains no solvents on the Hazardous Air Pollutants (HAPs) list. Minor amounts of such solvents may come in through tinting of some colors. To be used as topcoat in atmospheric environments.
Where to use
Marine:
Recommended for topside, deck and superstructure.
Protective:
Recommended for offshore environments, refineries, power plants, bridges and buildings. Suitable for a widerange of industrial structures. Used as a topcoat in pre-qualified NORSOK systems.
Approvals
This product contributes to the Green Buildings Standard credits. Please see section Green Building Standards.
APAS approved to specification 2911
When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO
2010 FTP Code Ch. 8
Consult your New Guard Coatings representative for details
Colors
Selected colors over Multicolour tinting system (MCI)
Application
| Spray | Use air spray or airless spray |
| Brush | Recommended for stripe coating and small areas, care must be taken to achieve the specified dry film thickness. |
| Roller | May be used. However when using roller application care must be taken to apply sufficient material in order to achieve the specified dry film thickness. |
Recommended thinner
Jotun Thinner No. 26/ Jotun Thinner No. 10
Jotun Thinner No. 10 can be used where aromatic solvents are accepted.
Thinning is not normally required. Consult the local representative for advice during application in extreme conditions. Do not thin more than allowed by local environmental legislation.
