Jotun Hardtop Pro

Description

This is a two component chemically curing acrylic polysiloxane coating. It is a high solids product. It has a high gloss finish. It has excellent gloss and colour retention. It has very good mechanical properties and chemical resistance. To be used as topcoat in atmospheric environments. The product is fully recoatable at any stage of curing. It cures down to 32 °F (0 °C). The product does not contain isocyanates, neither does it generate diisocyanates during hotwork / welding or fire.

Where to use

Protective:
Recommended for offshore structures, tank farms, refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures.
Marine:
Recommended for topside, deck and superstructure.

Approvals

Pre-qualified in accordance with NORSOK M-501 in selected systems
When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8

Colors

According to color card and Multicolor Industry tinting system (MCI)
Selected signal colors.

Approvals

Thinner

Thinner: Jotun Thinner No. 10/ Jotun Thinner No. 2/ Jotun Thinner No. 26
Jotun Thinner No. 2 can be used where xylene free solvents are required.
Jotun Thinner No. 26 is supplied and used in USA due to legislation.
Please consult the local Jotun representative for advice during application in severe conditions.
Do not thin more than allowed by local Health, Safety and Environment Regulations.