Jotun Epoxy HR

Description

This is a two component polyamine cured phenolic/novolac epoxy coating. Designed as a heat resistant coating, and it is resistant to low temperatures down to -196 °C and high temperatures up to 205 °C continuously. It may be used on insulated and non-insulated surfaces. This product may be used as a primer, mid coat or finish coat. Suitable for properly prepared carbon steel, galvanized steel, stainless steel and aluminum substrates. It can be applied on hot substrates up to 302 °F (150 °C). Please refer to the application guide for more detailed information. It will offer proper corrosion protection at ambient conditions during construction and shut-down periods. The product passes the standard tests used for qualifying coatings preventing corrosion under insulation (CUI).

Where to use

Protective:
Designed as corrosion protection for surfaces operating at elevated temperatures where long corrosion protection is desired. Suitable for insulated and non insulated surfaces.

Approvals and certificates

Passing CUI 3 multiphase test as described in ISO 19277-2018.
Tested in accordance with ISO 12944-9.
Tested in accordance with ISO 3248:2000 determination of the effect of heat 500 hours at 204°C on carbon steel.
Tested in accordance with ISO 3248:2000 determination of the effect of heat 1000 hours at 204°C on stainless steel (SS304).
Tested in accordance with ISO 3248:2000 determination of the effect of heat 1000 hours at 204°C on alloyed steel (P91).

Colors

Aluminum, light grey
Other colours available upon request

Application

Thinner

Jotun Thinner No.23